NJCEP Journal Papers

  • Lu Zhang, Yidong Li, Manal Abed, Rajesh N. Davé, “Incorporation of surface-modified dry micronized poorly water-soluble drug powders into polymer strip films,” International Journal of Pharmaceutics, submitted August 2017.
  • Liang Chen, Xiaoyi Ding, Zizhou He, Zhonghui Huang, Kuriakose T Kunnath, Kai Zheng, Rajesh Dave, “Surface engineered excipients: I. Improved functional properties of fine grade microcrystalline cellulose,” International Journal of Pharmaceutics, submitted August 2017.
  • M. Capece, R. N. Davé, E. Bilgili, “A Pseudo-coupled DEM–Non-linear PBM Approach for Simulating the Evolution of Particle Size during Dry Milling,” Powder Technology, submitted June 2017, in review.
  • Mohammad Azad, Jacqueline Moreno, Rajesh Davé, “Stable and Fast-Dissolving Amorphous Drug Composites Preparation via Impregnation of Neusilin® UFL2,” Journal of Pharmaceutical Sciences, Submitted April 2017, in review.
  • Anagha Bhakay, Ecevit Bilgili, Rajesh Dave, “Quiescent and Agitated Redispersion as a Tool for Evaluating Dispersant Effectiveness in Dissolution Enhancement of Drug-Laden Nanocomposites,” AAPS Pharmaceutical Science and Technology, submitted May 2017, accepted.
  • Zhonghui Huang, Wannan Xiong, Xiaoliang Deng, Sayani Bhaumik, Rajesh N. Davé, “Improving blend content uniformity via dry particle coating of micronized drug powders”, European Journal of Pharmaceutical Sciences, 104, 344–355, May 2017. (Submitted November 2016, revised March 2017, accepted April 2017)
  • Xiaoliang Deng, Rajesh N. Davé, “Adhesion and friction of dry-coated nano-rough particles,” Powder Technology, Special Issue: Modelling & Simulation, 314, pp. 20-27, 2017. (Submitted May 2016, revised and accepted July 2016, in press, http://dx.doi.org/10.1016/j.powtec.2016.07.035.)
  • Ye Ying, Christian Beck, Aide Wu, Rajesh Dave, Zafar Iqbal, “Polymorph formation in fenofibrate in the absence and presence of polymer stabilizers: A low frequency Raman and differential scanning calorimetry study,” Journal of Raman Spectroscopy, 48(5), pp. 750-757, 2017. ( DOI 10.1002/jrs.5090, submitted May 2016, accepted December 2016, online February 2017)
  • Scott M. Krull, Jacqueline Moreno, Meng Li, Ecevit Bilgili, Rajesh N. Davé, “Critical material attributes (CMAs) of strip films loaded with poorly water-soluble drug nanoparticles: III. Impact of drug nanoparticle loading”, International Journal of Pharmaceutics, 523(1), pp. 33-41, 2017. (Submitted November 2016, revised February 2017, accepted March 2017; Volume 523, Issue 1, 15 May 2017, Pages 33-41)
  • Xiaoliang Deng, Rajesh N. Davé, “Properties of force networks in jammed granular media,” Granular Matter, 19(2), 27, 2017. (Submitted November 2016, revised and accepted February 2017, online March 2017; Volume 19, Issue 2, Article number 27, 1 May 2017.)
  • Maxx Capece, Zhonghui Huang, Rajesh Davé, “Insight into a Novel Strategy for the Design of Tablet Formulations Intended for Direct Compression,” Journal of Pharmaceutical Sciences, 106(6), pp. 1608-1617, 2017. (submitted November 2016, revised and accepted February 2017.)
  • Xiaoliang Deng, Rajesh N. Davé, “Breakage of fractal agglomerates,” Chemical Engineering Science, Volume 161, 6 April 2017, Pages 117-126. (Submitted June 2016, revised November 2016, accepted December 2016.)
  • Scott M Krull, Jennifer Ammirata, Sonia Bawa, Meng Li, Ecevit Bilgili, Rajesh Dave, “Critical material attributes (CMAs) of strip films loaded with poorly water-soluble drug nanoparticles: II. Impact of polymer molecular weight,” Journal of Pharmaceutical Sciences, Volume 106, Issue 2, Pages 619-628, February 2017. (submitted August 2016, revised and accepted October 2016, online 2016, http://dx.doi.org/10.1016/j.xphs.2016.10.009)
  • Mohammad Azad, Jacqueline Moreno, Ecevit Bilgili, Rajesh Dave, “Fast Dissolution of Poorly Water Soluble Drugs from Fluidized Bed Coated Nanocomposites: Impact of Carrier Size,” International Journal of Pharmaceutics, Volume 513, Issue 1-2, Pages 319-331, November 2016. (submitted May 2016, revised August 2016, accepted September 2016, DOI: 10.1016/j.ijpharm.2016.09.046.)
  • Xiaoliang Deng, Zhonghui Huang, Wenqiang Wang, Rajesh N. Davé, “Investigation of nanoparticle agglomerates properties using Monte Carlo simulations,” Advanced Powder Technology, Vol. 27, Issue 5, Pages 1971-1979, September 2016. (submitted May 2016, revised and accepted June 2016, in press, http://dx.doi.org/10.1016/j.apt.2016.06.029.)
  • Scott M Krull, Hardik V Patel, Meng Li, Ecevit Bilgili, Rajesh Dave, “Critical material attributes (CMAs) of strip films loaded with poorly water-soluble drug nanoparticles: I. Impact of plasticizer on film properties and dissolution,” European Journal of Pharmaceutical Sciences, 92, pp 146-155, 2016. (submitted May 2016, accepted July 2016)
  • Meng Li, Mohammad Azad, Rajesh  Davé, Ecevit Bilgili, “Nanomilling of Drugs for Bioavailability Enhancement: A Holistic Formulation–Process Perspective,” Pharmaceutics, 8, 17, 2016. (doi:10.3390/pharmaceutics8020017, submitted March 2016, accepted, May 2016, published, May 2016) 
  • Scott M. Krull, Zhelun Ma, Meng Li, Rajesh N. Davé, Ecevit Bilgili, “Preparation and characterization of fast dissolving pullulan films containing BCS Class II drug nanoparticles for bioavailability enhancement”, Drug Development and Industrial Pharmacy, 42(7), pp. 1073-1085, 2016. (submitted August 2015, revised and accepted September 2015, final published July 2016)
  • Daniel To and Rajesh N. Davé, “Fluid bed film coating of fine ibuprofen particles”, Powder Technology, Volume 290, Pages 102–113, March 2016. (Submitted September 2014, revision submitted May 2015, accepted November 2015. doi:10.1016/j.powtec.2015.11.059)
  • Anagha Bhakay, Emanuel Vizzotti, Meng Li, Rajesh Davé, and Ecevit Bilgili, “Incorporation of Fenofibrate Nanoparticles Prepared by Melt Emulsification into Polymeric Strip Films”, Journal of Pharmaceutical Innovation, 11, pp 53–63, 2016. (submitted August 2015, revised and accepted September 2015, DOI 10.1007/s12247-015-9237-2) 
  • Meng Li, Lu Zhang , Rajesh N. Davé, Ecevit Bilgili, “An Intensified Vibratory Milling Process for Enhancing the Breakage Kinetics during the Preparation of Drug Nanosuspensions,” AAPS PharmSciTech, vol. 17, issue 2 (2016). (submitted May 2015, revised June 2015, accepted July 2015.)
  • Ramana Susarla, Afolawemi Afolabi, Darshan Patel, Ecevit Bilgili, Rajesh N. Davé, “Novel use of superdisintegrants as viscosity enhancing agents in biocompatible polymer films containing griseofulvin nanoparticles,” Powder Technology, 285, pp 25–33, 2015. (doi:10.1016/j.powtec.2015.06.024. Submitted February 2015, revised May 2015, accepted and online June 2015, final publication date November 2015.)
  • Mohammad Azad, Afolawemi Afolabi, Anagha Bhakay, Jonathan Leonardi, Rajesh Davé, Ecevit Bilgili, “Enhanced physical stabilization of fenofibrate nanosuspensions via wet co-milling with a superdisintegrant and an adsorbing polymer,” European Journal of Pharmaceutics and Biopharmaceutics, Volume 94, Pages 372-385, 2015. (Submitted February 2015, revised and accepted May 2015, final published date August 2015) 
  • Laila J. Jallo and Rajesh N. Davé, “Explaining Electrostatic Charging and Flow of Surface-Modified Acetaminophen Powders as a Function of Relative Humidity Through Surface Energetics”, Journal of Pharmaceutical Sciences, vol. 104, 2225–2232, June 2015. (early online – May 2015, DOI: 10.1002/jps.24479, submitted December 2014, revision submitted March 2015, accepted April 2015)
  • Scott Krull, Ramana Susarla, Afolawemi Afolabi, Meng Li, Ye Ying, Zafar Iqbal, Ecevit Bilgili, Rajesh N. Davé, “Polymer strip films as a robust, surfactant-free platform for delivery of BCS Class II drug nanoparticles”, International Journal of Pharmaceutics, 489, 45–57, 2015. (Submitted August 2014, revised January 2015, second revision, March 2015, accepted, April 2015, available online April 15, 2015 - doi:10.1016/j.ijpharm.2015.04.034. Publication date, 15, July 2015)
  • Maxx Capece, Rajesh Davé, “Enhanced Physical Stability of Amorphous Drug Formulations via Dry Polymer Coating”, Journal of Pharmaceutical Sciences, 104:2076–2084, 2015 (submitted December 2014, revision submitted and accepted March 2015; DOI 10.1002/jps.24451. Publication date ) 
  • Scott M. Krull, Meng Li, Ecevit Bilgili, and Rajesh N. Davé, “Polymer Strip Films for Delivery of Poorly Water-Soluble Drug”, American Pharmaceutical Review, Invited Contribution, April 2015. (submitted March 2015, accepted and published April 2015) 
  • Meng Li, Naveen Yaragudi, Afolawemi Afolabi, Rajesh Dave, Ecevit Bilgili, “Sub-100 nm drug particle suspensions via wet milling with low bead contamination through novel process intensification”, Chemical Engineering Science, 130 (2015) 207–220. (Submitted December 2014, revised and accepted March 2015.)
  • Mohammad Azad, Colby Arteaga, Beshoy Abdelmalek, Rajesh Davé, Ecevit Bilgili, “Spray drying of drug–swellable dispersant suspensions for preparation of fast-dissolving, high drug loaded, surfactant-free nanocomposites,” Drug Development and Industrial Pharmacy, Volume 41, Issue 10, pages 1617-1631, October 2015. (submitted August 2014, accepted October 2014, in press, doi: 10.3109/03639045.2014.976574.)
  • M. Capece, J. Barrows, and R. N. Davé, “Controlled Release from Drug Microparticles via Solventless Dry-polymer Coating,” Journal of Pharmaceutical Sciences, Vol. 104, p1340–1351, 2015. (Submitted October 2014, revised and accepted December 2014, published on-line, 14 Jan 2015, DOI: 10.1002/jps.24335.)
  • M. Capece, R. N. Davé, E. Bilgili, “On the origin of non-linear breakage kinetics in dry milling processes”, Powder Technology, Vol. 272, p189-203, March 2015. (Submitted September 2014, revision submitted and accepted in November 2014.)
  • X. Deng, J. Scicolone, X. Han, R. N. Davé, “Discrete Element Method Simulation of a Conical Screen mill: A Continuous Dry Coating Device,” Chemical Engineering Science, Vol 125, p58–74, March 2015. (Submitted November 2013, Revision submitted June 2014, second revision submitted and accepted August 2014, in press. DOI: 10.1016/j.ces.2014.08.051)
  • Z. Huang, J. V. Scicolone, L. Gurumurthy, R. N. Davé, “Flow and Bulk Density Enhancements of Pharmaceutical Powders using a Conical Screen Mill: A Continuous Dry Coating Device,” Chemical Engineering Science, Vol 125, p209–224, March 2015. (Submitted November 2013, Revision submitted March 2014, Accepted May 2014, in press, DOI: 10.1016/j.ces.2014.05.038.)  
  • C. Knieke, M. Azad, D. To, E. Bilgili, R. N. Davé, “Sub-100 micron Fast Dissolving Fluidized Bed Coated Nanocomposite Drug Powders,” Powder Technology, Vol 271, p 49-60, 2015, February 2015. (Submitted April 2014, revised August 2014, accepted October 2014. 10.1016/j.powtec.2014.10.024)
  • Z. Huang, J. V. Scicolone, X. Han, R. N. Davé, “Improved blend and tablet properties of fine pharmaceutical powders via dry particle coating,” International Journal of Pharmaceutics, Vol. 478(2) p447-455, January 2015. (Submitted July 2014, revised and accepted November 2014, in press, doi:10.1016/j.ijpharm.2014.11.068)
  • M. A. Azad, C. Knieke, D. To, R. Davé, “Preparation of Concentrated Stable Fenofibrate Suspensions via Liquid Antisolvent Precipitation,” Drug Development and Industrial Pharmacy, Vol. 40 Issue 12, p1693-1703, December 2014. (Submitted, May 2013, revision submitted August 2013, accepted September 2013, online, October 8, 2013. doi:10.3109/03639045.2013.842580)
  • A. Bhakay, M. Azad, E. Vizzotti, R. N. Dave, and E. Bilgili, “Enhanced recovery and dissolution of griseofulvin nanoparticles from surfactant-free nanocomposite microparticles incorporating wet-milled swellable dispersants”, Drug Development and Industrial Pharmacy, Vol. 40, No. 11: 1509–1522, Nov 2014. (submitted May 2013, revised and accepted July 2013, online, August 28, 2013. doi:10.3109/03639045.2013.831442)
  • J. Zhang, Y. Ying, B. Pielecha-Safira, E. Bilgili, R. Ramachandran, R. Romañach, R. Davé, Z. Iqbal, “Raman spectroscopy for in-line and off-line quantification of poorly soluble drugs in strip films,” International Journal of Pharmaceutics, Vol. 475, (1–2), Pages 428–437, 20 November 2014.  (DOI: 10.1016/j.ijpharm.2014.08.051 -- submitted December 2013, revised March 2014, second revision July 2014, third revision submitted and accepted and on-line in August 2014)
  • M. Capece, E. Bilgili, R. N. Davé, “Insight into First-order Breakage Kinetics Using a Particle-scale Breakage Rate Constant”, Chemical Engineering Science, Volume 117, 27 September 2014, Pages 318-330. (Submitted January 2014, revision submitted May 2014, Accepted June 2014, in press, DOI: 10.1016/j.ces.2014.06.019.)
  • M. Capece, R. N. Davé, “Solventless Polymer Coating of Microparticles,” Powder Technology, 261, July 2014, Pages 118–132. (submitted August 2013, revision submitted March 2014, Accepted April 2014; final version published July 2014) DOI: 10.1016/j.powtec.2014.04.012
  • M. Capece, E. Bilgili, R. N. Davé, “Formulation of a Physically Motivated Breakage Rate Parameter for Dry Ball Milling via the Discrete Element Method,” AIChE Journal, 60 (7): 2404–2415, July 2014. (submitted June 2013, revision submitted December 2013 and March 2014, accepted March 2014, published July 2014.)
  • M. A. Azad, A. Afolabi, N. Patel, R. Davé, E. Bilgili, “Preparation of Stable Colloidal Suspensions of Superdisintegrants via Wet Stirred Media Milling,” Particulogy, Vol 14, pp. 76-82, June 2014. (Submitted March 2013, revised June 2013, accepted July 2013, online, September 2013, final June 2014) doi: 10.1016/j.partic.2013.07.008
  • M. Capece, Z. Huang, D. To, M. Aloia, C. Muchira, R. N. Davé, A.B. Yu, “Prediction of Porosity from Particle Scale Interactions:  Surface Modification of Fine Cohesive Powders,” Powder Technology, 254, 103–113, 2014. (Submitted June 2013, revisions submitted November 2013, accepted, January 2014, published as a final version March 2014, 10.1016/j.powtec.2014.01.006.)
  • A. Bhakay, M. Azad, E. Bilgili, R. N. Davé, “Redispersible fast dissolving nanocomposite microparticles of poorly water-soluble drugs,” International Journal of Pharmaceutics, Vol. 461, Issues 1–2, Pages 367-379, 30 January 2014. (Submitted June 2013, revised October 2013, accepted November 2013, DOI: 10.1016/j.ijpharm.2013.11.059; out January 2014)
  • C. Knieke, A. Rawtani, R. N. Davé, “Concentrated fenofibrate nanoparticle suspensions from melt emulsification for enhanced drug dissolution,” Chemical Engineering & Technology, 37 (1), pp. 157-167, 2014. (Submitted, May 2013, revision submitted July 2013, accepted September 2013, online, December 3, 2013, DOI: 10.1002/ceat.201300355; out January 2014)
  • R. Susarla, L. Sievens-Figueroa, A. Bhakay, Y. Shen, J. I. Jerez-Rozo, W. Engen, B. Khusid, E. Bilgili, R. J. Romañach, K. R. Morris, B. Michniak-Kohn, R. N. Davé, “Fast drying of biocompatible polymer films loaded with poorly water-soluble drug nano-particle via low temperature forced convection,” International Journal of Pharmaceutics, Vol. 455, Issues 1–2, 15 October 2013, Pages 93–103. (Submitted March 2013, revised June 2013, accepted and in press July 2013, DOI: 10.1016/j.ijpharm.2013.07.051.)
  • X. Deng, R. N. Davé, “Dynamic simulation of particle packing influenced by size, aspect ratio and surface energy,” Granular Matter, Special Issue, (2013) 15:401–415. DOI 10.1007/s10035-013-0413-0 (submitted January 2013, revision submitted and accepted March 2013, out August 2013.) 
  • Xi Han, Laila Jallo, Daniel To, Chinmay Ghoroi, Rajesh Davé, “Passivation of high surface energy sites of milled ibuprofen crystals via dry coating,” Journal of Pharmaceutical Sciences, Vol. 102(7), 1–15 (2013) (Submitted February 2013, accepted April 2013. Out July 2013)
  • Xiaoliang Deng, James Scicolone, Rajesh N. Davé, “Discrete element method simulation of cohesive particles mixing under magnetically assisted impaction,” Powder Technology, 243, pp. 96-109, 2013. DOI: 10.1016/j.powtec.2013.03.043 (Submitted October 2012, revised February 2013, accepted March 2013; out July 2013) 
  • Catharina Knieke, Mohammad A Azad, Rajesh N. Davé, Ecevit Bilgili, “A Study of the Physical Stability of Wet Media-Milled Fenofibrate Suspensions Using Dynamic Equilibrium Curves,” Chemical Engineering Research and Design, 91 (7), pp. 1245-1258, 2013. DOI: 10.1016/j.cherd.2013.02.008 (submitted, December 2012, revision submitted January 2013, accepted, February 2013; out July 2013)
  • M. Capece, R. N. Davé, E. Bilgili, “Influence of Non-Linear Breakage Kinetics on the Attainment of Self-Similarity for Dry Milling Processes,” Chemical Engineering Science, 97, pp. 96-107, June 2013. DOI:10.1016/j.ces.2013.04.017 (Submitted, January 2013, accepted, April 2013)
  • James Scicolone, Daniel Lepek, Lin Louie and Rajesh N. Davé, “Fluidization and Mixing of Nanoparticle Agglomerates Assisted via Magnetic Impaction,” Journal of Nanoparticle Research, 15:1434, 2013. DOI 10.1007/s11051-013-1434-7 (Submitted August 2012, in review, revision submitted October 2012, second revision submitted January 2013, accepted January 2013, in press January 2013.)
  • John F. Gamble, Rajesh N. Davé, San Kiang, Michael M. Leane, Mike Tobyn, Steve S.Y. Wang, “Investigating the applicability of inverse gas chromatography to binary powdered systems: An application of surface heterogeneity profiles to understanding preferential probe-surface interactions,” International Journal of Pharmaceutics, 445 (2013) 39– 46, 2013. doi:10.1016/j.ijpharm.2013.01.061. (Submitted December 2012, accepted January 2013)
  • Rajesh N. Davé, Ecevit Bilgili, Alberto Cuitiño, Laila Jallo, “Special Issue on Pharmaceutical Powders: Towards Developing Understanding of the Influence of Materials and Processes on Product Performance,” Powder Technology, 236 (2013) 1–4. DOI: 10.1016/j.powtec.2012.09.005 (Submitted September 2012)
  • R. B. Patel, J. Liu, J. V. Scicolone, S. Roy, S. Mitra, R. N. Dave, Z. Iqbal, “Formation of Stainless Steel-Carbon Nanotube Composites using a Scalable Chemical Infiltration Process,” Journal of Materials Science, 48 (3), pp. 1387-1395, February 2013. DOI 10.1007/s10853-012-6885-1 (Submitted June 2012, accepted September 2012, issue date February 2013.)
  • Xi Han, Chinmay Ghoroi, Rajesh Davé, “Dry coating of micronized API powders for improved dissolution of directly compacted tablets with high drug loading,” International Journal of Pharmaceutics, Special Issue: Mechanical Properties of Drug Tablets, 442, 74– 85, 2013. 10.1016/j.ijpharm.2012.08.004 (Submitted January 2012, revision submitted July 2012, Accepted August 2012.) 
  • Christian Beck, Lucas Sievens-Figueroa, Konstantin Gärtner, Jackeline I. Jerez-Rozo, Rodolfo J. Romañach, Bozena Michniak-Kohn, Ecevit, Bilgili and Rajesh N. Davé, “Development of films containing griseofulvin microparticles produced via liquid antisolvent precipitation,” Powder Technology, 236 (2013) 37–51. doi:10.1016/j.powtec.2012.05.047 (Accepted, May 2012, submitted January 2012)
  • Anna Łuczak, Laila J. Jallo, Rajesh N. Dave, Zafar Iqbal, “Polymorph Stabilization in Processed Acetaminophen Powders,” Powder Technology, 236 (2013) 52–62, doi:10.1016/j.powtec.2012.05.046. (Accepted, May 2012, submitted January 2012)
  • Chinmay Ghoroi, Lakxmi Gurumurthy, D. J. McDaniel, Laila Jallo, Rajesh N. Davé, “Multi-faceted characterization of flow, packing and fluidization properties of pharmaceutical powders for discerning the influence of surface modification,” Powder Technology, 236 (2013), 63–74. doi:10.1016/j.powtec.2012.05.039.  (Accepted, May 2012, submitted January 2012)
  • Sameer Dalvi, Mohammad Azad, Rajesh N. Davé, “Precipitation and Stabilization of Ultrafine Particles of Fenofibrate in Aqueous Suspensions by RESOLV,” Powder Technology, 236 (2013) 75–84. doi:10.1016/j.powtec.2012.05.038 (Accepted, May 2012, submitted January 2012)
  • Anagha Bhakay, Ecevit Bilgili, Rajesh Davé, “Recovery of BCS Class II drugs during aqueous redispersion of core-shell type nanocomposite particles produced via fluidized bed coating,” Powder Technology, 236 (2013) 221–234. doi: 10.1016/j.powtec.2011.12.066 (Submitted September 2011, accepted December 2011) 
  • Chinmay Ghoroi, Xi Han, Daniel To, Laila Jallo, Lakxmi Gurumurthy, Rajesh N. Davé, “Dispersion of ultrafine powders through surface modification or rapid expansion,” Chemical Engineering Science, Special Issue (Ed. F. Saito), 85, pp. 11-24, 2013;  doi:10.1016/j.ces.2012.02.038 (submitted August 2011, revision submitted January 2012, accepted February 2012) 
  • Lucas Sievens-Figueroa, Natasha Pandya, Anagha Bhakay, Golshid Keyvan, Bozena Michniak-Kohn, Ecevit Bilgili, Rajesh N. Davé, “Using USP I and USP IV for discriminating dissolution rates of nano and micro particle loaded pharmaceutical strip-films”, AAPS PharmSciTech, S 13 (4) , pp. 1473-1482, December 2012; DOI: 10.1208/s12249-012-9875-3. (Submitted July 2012, accepted October 2012) 
  • Maxx Capece, Rajesh Davé, Ecevit Bilgili, “A Rational Function Approximation to the Effectiveness Factor for Multi-Particle Interactions in Dense-Phase Dry Milling,” Powder Technology, 230 (2012) 67–76. doi:10.1016/j.powtec.2012.06.054 (Submitted January 2012, revision submitted June 2012, accepted, July 2012).
  • Dave K. Balachandran, Laila J. Jallo, Rajesh N. Davé, Stephen P. Beaudoin, “Adhesion of Dry Nano-Coated Particles to Stainless Steel: A Physical Interpretation”, Powder Technology, 226, pp. 1-9, 2012. doi: 10.1016/j.powtec.2012.02.035. (submitted January 2011, revision submitted October 2011, accepted, available online February 24, 2012) 
  • Wusheng Zhu, Francis S Romanski, Sameer V Dalvi, Rajesh N. Davé, M. Silvina Tomassone, “Atomistic Simulations of Aqueous Griseofulvin Crystals in the Presence of Individual and Multiple Additives,” Chemical Engineering Science, 73, January 2012, 218–230. (Submitted June 2011, revision submitted November 2011, accepted January 2012.)
  • Amit Banerjee, Rajesh N. Davé, “Robust Clustering,” Wiley Interdisciplinary Reviews: Data Mining and Knowledge Discovery, Volume 2, Issue 1, pp 29-59, 2012. (Submitted 2011; Accepted August 2011, in Press August 27, 2011. Jan/Feb 2012 final publication date.)
  • Laila J. Jallo, Chinmay Ghoroi, Lakxmi Gurumurthy, Utsav Patel, Rajesh N. Davé, “Improvement of flow and bulk density of pharmaceutical powders using surface modification,” International Journal of Pharmaceutics, 423 (2012) 213– 225, doi:10.1016/j.ijpharm.2011.12.012 (Submitted, July 2011, revision submitted, October 2011, accepted December 2011)
  • L. Sievens-Figueroa, A. Bhakay, J. I. Jerez-Rozo, N. Pandya, E. Bilgili, R. Romanach, B. Michniak-Kohn, Z. Iqbal, R. N. Davé, “Preparation and characterization of hydroxypropyl methyl cellulose films containing stable BCS Class II drug nanoparticles for pharmaceutical applications,” International Journal of Pharmaceutics, 423 (2012) 496– 508, doi:10.1016/j.ijpharm.2011.12.001. (Submitted, September 2011, revision submitted November 2011, accepted December 2011)
  • Maxx Capece, Ecevit Bilgili, Rajesh Davé, “Emergence of falsified kinetics as a consequence of multi-particle interactions in dense-phase comminution processes,” Chemical Engineering Science, Volume 66, Issue 22, 15 November 2011, Pages 5672-5683. (Submitted June 2011, revised, July 2011, accepted August 2011)
  • Matthew P. Mullarney, Lauren E. Beach, Rajesh N. Davé, Beth A. Langdon, Mark Polizzi and Daniel O. Blackwood, “Applying dry powder coatings to pharmaceutical powders using a comil for improving powder flow and bulk density,” Powder Technology, vol. 212, 397–402, October 2011, doi:10.1016/j.powtec.2011.06.008.
  • Xi Han, Chinmay Ghoroi, Daniel To; Yuhua Chen, Rajesh N. Davé, "Simultaneous micronization and surface modification for improvement of flow and dissolution of drug particles,” International Journal of Pharmaceutics, 415, 185– 195, August 2011.
  • Daniel To, Rajesh N. Davé, Sankaran Sundaresan, “Nano-particle Mixing via Rapid Expansion of High-Pressure or Supercritical Suspensions,” Journal of Nanoparticle Research, Volume 13, Issue 9 (2011), Page 4253-4266, 2011. DOI: 10.1007/s11051-011-0369-0
  • Maxx Capece, Rajesh N. Davé, “Application of Fluidized Bed Film Coating for Membrane Encapsulation of Catalysts”, Powder Technology, Volume 211, Issues 2-3, August 2011, Pages 199-206. (submitted, August 2010, revision submitted January 2011,)
  • Anagha Bhakay, Maneesh Merwade, Ecevit Bilgili, and Rajesh N. Davé, “Novel Aspects of the Wet Media Milling for the Production of Microsuspensions and Nanosuspensions of Poorly Water-Soluble Drugs,” Drug Development and Industrial Pharmacy, Volume 37 (8), 2011, 1–14.
  • James Scicolone, Ajit Mujumdar, Sankaran Sundaresan, and Rajesh N. Davé, “Environmentally Benign Dry Mechanical Mixing of Nano-particles using Magnetically Assisted Impaction Mixing Process”, Powder Technology, Volume 209, Issues 1-3, May 2011, Pages 138-146.
  • Maxx Capece, Ecevit Bilgili, Rajesh Davé, “Identification of the Breakage Rate and Distribution Parameters in a Non-linear Population Balance Model for Batch Milling”, Powder Technology, 208 (1), pp. 195-204, 2011.
  • Laila J. Jallo, Yuhua Chen, James Bowen, Frank Etzler, and Rajesh Davé, “Prediction of Inter-particle Adhesion Force from Surface Energy and Surface Roughness,” Journal of Adhesion Science and Technology, Vol. 25 (2011) 367-384.
  • Christian Beck, Sameer V. Dalvi, and Rajesh Davé, “Controlled Liquid Antisolvent Precipitation of Drug Particles using a Rapid Mixing Device,” Chemical Engineering Science, 65 (2010) 5669–5675. DOI: 10.1016/j.ces.2010.04.001
  • Laila J. Jallo, Mirko A. Schoenitz, Edward L. Dreizin, Rajesh N. Davé, and Curtis E. Johnson, “The effect of surface modification of aluminum powder on its flowability, combustion and reactivity”, Powder Technology, Vol. 204, pp. 63-70, 2010. doi:10.1016/j.powtec.2010.07.017
  • Lauren Beach, Jorge Ropero, Ajit Mujumdar, Manel Alcalà, Rodolfo J. Romañach, Rajesh N. Davé, “Near-infrared Spectroscopy for the In-line Characterization of Powder Voiding,  Part II: Quantification of Enhanced Flow Properties of Surface Modified Active Pharmaceutical Ingredients, Journal of Pharmaceutical Innovation, Volume 5, Numbers 1-2, July 2010. DOI: 10.1007/s12247-010-9075-1.
  • Yuhua Chen, Laila Jallo, Miguel A. S. Quintanilla and Rajesh Davé, “Characterization of Particle and Bulk Level Cohesion Reduction of Surface Modified Fine Aluminum Powders”, Colloids and Surfaces A: Physicochemical and Engineering Aspects, Vol. 361, pp. 66-80, April 2010.  DOI: 10.1016/j.colsurfa.2010.03.015.
  • Sameer V. Dalvi and Rajesh N. Davé, “Analysis of Nucleation Kinetics of Poorly Water Soluble Drugs in presence of Ultrasound and Hydroxypropyl Methyl Cellulose during Antisolvent Precipitation” International Journal of Pharmaceutics, Vol. 387 (1 & 2), pp. 172–179, March 2010. DOI: 10.1016/j.ijpharm.2009.12.026
  • D. Lepek, J.M. Valverde, R. Pfeffer, A. Castellanos, R.N. Davé, “Enhanced Nanofluidization by Alternating Electric Fields,” AIChE Journal, Cover Article, Vol 56(1), p 54-65, January 2010.  DOI: 10.1002/aic.11954  
  • Jorge Ropero, Lauren Beach, Manel Alcalà, Raizza Rentas, Rodolfo J. Romañach, Rajesh N. Davé, “Near-infrared Spectroscopy for the In-line Characterization of Powder Voiding, Part I: Development of the Methodology”, Journal of Pharmaceutical Innovation, Volume 4, Number 4, pp 187-197, December 2009. DOI: 10.1007/s12247-009-9069-z
  • Daniel To, Xiaolong Yin, Sankaran Sundaresan, Rajesh Davé, “Investigation of Nano-particle Aggregate Deagglomeration via the Rapid Expansion of High-Pressure Suspensions in Carbon Dioxide Through an Orifice”, AIChE Journal, Vol. 55 (11), pp. 2807-2826, 2009. DOI: 10.1002/aic.11887  
  • Qi Zhang, Jun Yang, Shuli Teng, Rajesh N. Dave, Linjie Zhu, Peng Wang, Ming-Wan Young, Costas G. Gogos, “In-situ, Simultaneous Milling and Coating of Particulates with Nano-particles”, Powder Technology, 196 (2009) 292–297. doi:10.1016/j.powtec.2009.08.011
  • H. Kimmel, L. S. Hirsch, L. Simon, L. Burr-Alexander, R. N. Davé, “Implementing Concepts of Pharmaceutical Engineering into High School Science Classrooms,” Chemical Engineering Education, Vol. 43, No. 3, pp. 187-193, Summer 2009 (Appeared September 2009).
  • Sameer V. Dalvi and Rajesh N. Davé, “Controlling particle size of a poorly water-soluble drug using ultrasound and stabilizers in antisolvent precipitation”, Industrial and Engineering Chemistry Research, Vol. 48 (16), pp 7581–7593, July 2009. DOI: 10.1021/ie900248f.
  • Xianjin Jiang, Mikhaylo A. Trunov, Mirko Schoenitz, Rajesh N. Davé, and Edward L. Dreizin, “Mechanical Alloying and Reactive Milling in a High Energy Planetary Mill,” Journal of Alloys and Compounds, Volume 478, Issues 1-2, 10, Pages 246-251, June 2009. doi:10.1016/j.jallcom.2008.12.021.
  • Yuhua Chen, Miguel A.S. Quintanilla, Jun Yang, Jose M. Valverde and Rajesh N. Davé, “Pull-off Force of Coated Fine Powders under Small Consolidation,” Physical Review E, 79, pp. 041305, June 2009.
  • Yuhua Chen, Jun Yang, Rajesh N. Davé and Robert Pfeffer, “Granulation of Cohesive Geldart Group C Powders in a Mini-Glatt Fluidized Bed,” Powder Technology, 191, April (2009) 206–217, doi:10.1016/j.powtec.2008.10.010 .
  • Ganesh P. Sanganwar, Alexandre Ermoline, James V. Scicolone, Rajesh N. Davé, and Ram B. Gupta, “Environmentally Benign Nano-mixing by Sonication in Supercritical CO2,” Journal of Nanoparticle Research, Volume 11, Issue 2, February (2009), Page 405. doi: 10.1007/s11051-008-9394-z
  • Yuhua Chen, Jun Yang, Ajit Mujumdar and Rajesh N. Davé, “Fluidized Bed Film Coating of Cohesive Geldart Group C Powders,” Powder Technology, 189, February (2009) 466–480 doi:10.1016/j.powtec.2008.08.002
  • M.A.S. Quintanilla, J.M. Valverde, A. Castellanos, D. Lepek, R. Pfeffer, and R. N. Davé, “Nano fluidization as affected by vibration and electrostatic fields,” Chemical Engineering Science, Volume 63, Issue 22, November 2008, Pages 5559-5569, DOI: 10.1016/j.ces.2008.08.012
  • Jose Quevedo, Gaurav Patel, Robert Pfeffer, Rajesh Davé, Agglomerates and granules of nanoparticles as filter media for submicron particles, Powder Technology 183 (3), pp. 480-500 (2008), doi: 10.1016/j.powtec.2008.01.020
  • Yuhua Chen, Jun Yang, Rajesh N. Davé and Robert Pfeffer, “Fluidization of Coated Group C Powders,” AIChE Journal, Volume 54, Issue 1, pp. 104-121, January 2008.
  • J. M. Valverde, A. Catellanos,  Daniel Lepek, R. N. Davé, R. Pfeffer, “The effect of gas viscosity on the agglomerate particulate fluidization state of fine and ultrafine particles,” AIChE Journal, Volume 54, Issue 1, pp. 86-103, January 2008.
  • Abhijit Gokhale, Boris Khusid, Rajesh N. Davé, Robert Pfeffer, “Effect of the Solvent Strength on the Formation of Submicronmeter Polymer Particles in Supercritical Microjets,” Journal of Supercritical fluids, Volume 43, Issue 2, pp. 341-356, December 2007.
  • Banerjee, A., M. Misra, D. Pai, L-Y. Shih, R. Woodley, X–J. Lu, A.R. Srinivasan, W. K. Olson, R. N. Davé, and C. A. Venanzi, “Feature Extraction Using Molecular Planes for Fuzzy Relational Clustering of a Flexible Dopamine Reuptake Inhibitor”, Journal of Chemical Information and Modeling, Vol. 47, pp. 2216-2227, October 2007.
  • S. S. Dukhin, Y. Shen, R. Davé, R. Pfeffer; “Development in modeling submicron particle formation in two phases flow of solvent-supercritical antisolvent emulsion,” Advances In Colloid And Interface Science, Volumes 134-135, pp. 72-88, October 2007.
  • Ryan Barrow, Jun Yang, Rajesh Davé, R. Pfeffer, “Dry-mixing of sub-micron B and BaCrO4 particles for use in a time delay composition ”, SAFE Journal, 35 (1), pp. 7-13, 2007.
  • Jose A. Quevedo, Jürgen Flesch, Robert Pfeffer, Rajesh Davé, “Evaluation of Assisting Methods on Fluidization of Hydrophilic Nanoagglomerates by Monitoring Moisture in the Gas Phase,” Chemical Engineering Science, Vol. 62 (9), pp. 2608-2622, May 2007.
  • Jose Quevedo, H. Nakamura, Y. Shen, R. N. Davé, R. Pfeffer, S. Watano, “Fluidization of Nanoparticles in a Rotating Fluidized Bed,” AIChE Journal, Volume 52 (7), pp 2401-2412 July 2006.
  • Wang, Y., Y-P. Wang, J. Yang, R. Pfeffer, R. N. Davé, B. Michniak, “Application of Supercritical Antisolvent Process for Sustained Drug Delivery System,” Powder Technology, Volume 164 (2), pp 94-102, May 2006.
  • Wenliang Chen, Mirko Schoenitz, Trent S. Ward, Rajesh N. Davé and Edward L. Dreizin, “Numerical Simulation of Mechanical Alloying in a Shaker Mill by Discrete Element Method,” KONA, 23, pp. 152-162, 2005.
  • Yang, J., Sliva, A., Banerjee, A., Dave, R.N., Pfeffer, R. Dry particle coating for improving the flowability of cohesive powders, (2005) Powder Technology, Special Issue in Memory of Prof. Molerus,158 1-3, Pages 21-33.
  • Banerjee, A., Dave, R.N. The fuzzy mega-cluster: Robustifying FCM by scaling down memberships, (2005) Lecture Notes in Artificial Intelligence (Subseries of Lecture Notes in Computer Science), 3613 PART I, Pages 444-453.
  • Yue, B., Yang, J., Huang, C.-Y., Dave, R., Pfeffer, R. Synthesis of macroporous PMMA/silica nanocomposite monoliths in supercritical carbon dioxide, (2005) Macromolecular Rapid Communications, 26 17, Pages 1406-1411.
  • Yu, Q., Dave, R.N., Zhu, C., Quevedo, J.A., Pfeffer, R. Enhanced fluidization of nanoparticles in an oscillating magnetic field, (2005) AIChE Journal, 51 7, Pages 1971-1979.
  • Dukhin, S.S., Shen, Y., Dave, R., Pfeffer, R. Droplet mass transfer, intradroplet nucleation and submicron particle production in two-phase flow of solvent-supercritical antisolvent emulsion, (2005) Colloids and Surfaces A: Physicochemical and Engineering Aspects, 261 1-3, Pages 163-176.
  • Dukhin, S., Zhu, C., Dave, R.N., Yu, Q. Hydrodynamic fragmentation of nanoparticle aggregates at orthokinetic coagulation, (2005) Advances in Colloid and Interface Science, 114-115, Pages 119-131.
  • Misra, M., Banerjee, A., Davé, R.N., Venanzi, C.A. Novel feature extraction technique for fuzzy relational clustering of a flexible dopamine reuptake inhibitor, (2005) Journal of Chemical Information and Modeling, 45 3, Pages 610-623.
  • Zhu, C., Yu, Q., Dave, R.N., Pfeffer, R. Gas fluidization characteristics of nanoparticle agglomerates, (2005) AIChE Journal, 51 2, Pages 426-439.
  • Wang, Y., Pfeffer, R., Dave, R., Enick, R. Polymer encapsulation of fine particles by a supercritical antisolvent process, (2005) AIChE Journal, 51 2, Pages 440-455.
  • T. S. Ward, W. Chen, M. Schoenitz, R. N. Dave, and E. L. Dreizin, “A Study of Mechanical Alloying Processes using Reactive Milling and Discrete Element Modeling,” Acta Materialia, Volume 53, Issue 10, Pages 2909-2918, June 2005.
  • Yue, B., Yang, J., Wang, Y., Huang, C.-Y., Dave, R., Pfeffer, R. Particle encapsulation with polymers via in situ polymerization in supercritical CO2 ,(2004) Powder Technology, 146 1-2, Pages 32-45.
  • Chen, W., Dave, R.N., Pfeffer, R., Walton, O. Numerical simulation of Mechanofusion system, (2004) Powder Technology, 146 1-2, Pages 121-136.
  • Nam, C.H., Pfeffer, R., Dave, R.N., Sundaresan, S. Aerated vibrofluidization of silica nanoparticles, (2004) AIChE Journal, 50 8, Pages 1776-1785.
  • Watano, S., Nakamura, H., Hamada, K., Wakamatsu, Y., Tanabe, Y., Dave, R.N., Pfeffer, R. Fine particle coating by a novel rotating fluidized bed coater ,(2004) Powder Technology, 141 3, Pages 172-176.
  • Zhu, C., Liu, G., Yu, Q., Pfeffer, R., Dave, R.N., Nam, C.H. Sound assisted fluidization of nanoparticle agglomerates, (2004) Powder Technology, 141 1-2, Pages 119-123.
  • Dukhin, S.S., Yang, J., Dave, R.N., Pfeffer, R. Deactivated sintering by particle coating: The significance of static and dynamic surface phenomena, (2004) Colloids and Surfaces A: Physicochemical and Engineering Aspects, 235 1-3, Pages 83-99.
  • Mujumdar, A., Wei, D., Dave, R.N., Pfeffer, R., Wu, C.-Y. Improvement of humidity resistance of magnesium powder using dry particle coating, (2004) Powder Technology, 140 1-2, Pages 86-97.
  • Wang, Y., Dave, R.N., Pfeffer, R. Polymer coating/encapsulation of nanoparticles using a supercritical anti-solvent process, (2004) Journal of Supercritical Fluids, 28 1, Pages 85-99.
  • Dukhin, S.S., Zhu, C., Dave, R., Pfeffer, R., Luo, J.J., Chávez, F., Shen, Y. Dynamic interfacial tension near critical point of a solvent-antisolvent mixture and laminar jet stabilization, (2003) Colloids and Surfaces A: Physicochemical and Engineering Aspects, 229 1-3, Pages 181-199.
  • Malik, M., Mujumdar, A., Dave, R. Numerically simulated flow characteristics of particulate beds in oscillating sectorial containers, (2003) Powder Technology, 133 1-3, Pages 91-105
  • Chávez, F., Debenedetti, P.G., Luo, J.J., Dave, R.N., Pfeffer, R. Estimation of the characteristic time scales in the supercritical antisolvent process, (2003) Industrial and Engineering Chemistry Research, 42 13, Pages 3156-3162.
  • Watano, S., Imada, Y., Hamada, K., Wakamatsu, Y., Tanabe, Y., Dave, R.N., Pfeffer, R. Microgranulation of fine powders by a novel rotating fluidized bed granulator, (2003) Powder Technology, 131 2-3, Pages 250-255.
  • Mohan, M.R., Dave, R.N., Pfeffer, R. Promotion of deactivated sintering by dry-particle coating, (2003) AIChE Journal, 49 3, Pages 604-618.
  • Yang, J., Wang, Y., Dave, R.N., Pfeffer, R. Mixing of nano-particles by rapid expansion of high-pressure suspensions, (2003) Advanced Powder Technology, 14 4, Pages 471-493.
  • Dave, R., Chen, W., Mujumdar, A., Wang, W., Pfeffer, R. Numerical simulation of dry particle coating processes by the discrete element method, (2003) Advanced Powder Technology, 14 4, Pages 449-470.
  • Wang, Y., Dave, R., Pfeffer, R., Sauceau, M., Letourneau, J.-J., Fages, J. Extraction and precipitation particle coating using supercritical CO2 ,(2002) Powder Technology, 127 1, Pages 32-44.
  • C. H. Lin and C. Zhu, “Applications of Particle Transport in Surface Deposition and Cleaning”, Chapter 7, in Surface Contamination and Precision Cleaning Handbook, ed. by K. L. Mittal and R. Kohli, Noyes Publications, 2003 (in press).
  • C. Zhu, C. H. Lin, G. H. Qian and R. Pfeffer, “Modeling of Pressure Drop and Flow Field in a Rotating Fluidized Bed”, Chemical Engineering Communications, Vol. 190(6), 2003.
  • C. Zhu, K. Lam, H.-H. Chu, X.-D. Tang, G. Liu, “Drag Forces of Interacting Spheres in Power-Law Fluids”, Mechanics Research Communications, accepted, 2003.
  • Dreizin, E., Mechanics of metal particle combustion, Combustion, Explosions and Shockwaves, submitted, 2003.
  • Dreizin, E., Schoenitz, M., Shoshin, Metal-Based Metastable Solid Solutions as a New Type of High Energy Density Materials" In Rocket Propulsion: Present and Future (L.DeLuca, Editor) 2003, in press)
  • Dreizin, E.L., "Effect of Phase Changes on Metal Particle Combustion Processes" Combustion Explosion and Shock Waves, 39 (2003, in press)
  • S. Watano, Y. Imada, K. Hamada, Y. Wakamatsu, Y. Tanabe, R. N. Dave, R. Pfeffer, "Micro-granulation of Fine Powders by a Novel Rotating Fluidized Bed Granulator," Powder Technology, vol. 131 (2-3), pp. 250- 255, 2003.
  • Schoenitz, M., Dreizin, E.L., "Structure and Properties of Al-Mg Mechanical Alloys" Journal of Materials Research (2003, in press)
  • Schoenitz, M., Dreizin, E.L., and Shtessel, E., "Constant Volume Explosions of Aerosols of Metallic Mechanical Alloys and Powder Blends" Journal of Propulsion and Power , 19(3) (2003, in press)
  • Shoshin, Y., and Dreizin, E., "Particle Combustion Rates in Premixed Flames of Polydisperse Metal ? Air Aerosols" Combustion and Flame, 133 (2003, in press)
  • X. Wang and C. Zhu, “Concentric Evaporating Spray Jets in Dilute Gas-Solid Pipe Flows”, Powder Technology, 129, 59-71, 2003.
  • Alexandre Ermoline, Mirko Schoenitz, Edward Dreizin, and Nan Yao "Production of Carbon Coated Aluminum Nanopowders in Pulsed Microarc Discharge" Nanotechnology, Accepted 2002
  • C. Zhu, G. L. Liu, X. Wang and L.-S. Fan, “A Parametric Model for Evaporating Liquid Jets in Gas-Solid Flows”, International Journal of Multiphase Flows, 28, 1479-1495, 2002.
  • C. Zhu, X. Wang, G. Liu, “Effect of Particle Loading on Liquid Nitrogen Jet Mixing in a FCC Riser”, in Circulating Fluidized Bed Technology VII, ed. by J. R. Grace, J. Zhu, H. de Lasa, Canadian Society for Chemical Engineering, Ottawa, Canada, 2002, pp.881-888.
  • D. Wei, R. N. Dave, and R. Pfeffer, "Mixing and Characterization of Nanosized Powders: An Assessment of Different Techniques" Journal of Nanoparticle Research, Invited Review Contribution, Vol. 4, pp. 21-41, 2002.
  • Drazer G., Koplik, J., Khusid, B., Acrivos, A., Deterministic and stochastic behavior of non-Brownian spheres in sheared suspensions. Journal of Fluid Mechanics (2002), 460, pp. 307- 335
  • Dreizin, E.L., Shoshin, Y.L., Murdyy, R.S., and Hoffmann, V.K., "Constant pressure flames of aluminum and aluminum-magnesium mechanical alloy aerosols in microgravity" Combustion and Flame 130:381?385 (2002)
  • Ermoline, A., Schoenitz, M., Dreizin, E., and Yao N., "Production of carbon-coated aluminum nanopowders in pulsed microarc discharge" Nanotechnology 13:638?643 (2002)
  • F. Chavez, P. G. Debenedetti, J-J. Luo, R. Dave, R. Pfeffer, "Estimation of the characteristic time scales in the supercritical antisolvent process," Industrial Engineering and Chemistry Research, accepted for publication, submitted, December 2002.
  • G. Drazer, J. Koplik, A. Acrivos, and B. Khusid, Adsorption phenomena in the transport of a colloidal particle, Phys. Rev. Letters, 89 (24), 244501, 2002
  • Mirko Schoenitz , Edward L. Dreizin, and Emil Shtessel "Constant Volume Explosions of Aerosols of Metallic Mechanical Alloys and Powder Blends" Journal of Propulsion and Power, Submitted, 2002.
  • Qiu, Z., Markarian, N., Khusid, B., Acrivos, A., Positive dielectrophoresis and heterogeneous aggregation in high-gradient ac electric fields. Journal of Applied Physics, 92(5), 2829-2843, 2002.
  • R. N. Dave and S. Sen, "Robust Fuzzy Clustering of Relational Data", IEEE Trans. Fuzzy Systems, Vol. 10, No. 6, pp. 713-727, December 2002.
  • S. Chen, C. S. Cheung, C. K. Chan and C. Zhu, “Numerical Simulation of Aerosol Collection in Filters with Staggered Parallel Rectangular Fibers”, Computational Mechanics, 28, 152-161, 2002.
  • Shoshin Y. and Dreizin E. "Radiation Intensity Profiles of Premixed Flames of Polydisperse Metal ? Air Aerosols" Combustion and Flame, Submitted, 2002
  • Shoshin Y., and Dreizin, E., "Production of well-controlled laminar aerosol jets and their application for studying aerosol combustion processes" Aerosol Science and Technology 36:953-962 (2002)
  • Shoshin, Y.L., Mudryy, R., S., and Dreizin, E.L., "Preparation and Characterization of Energetic Al-Mg Mechanical Alloy Powders" Combustion and Flame 128:259 ?269 (2002)
  • Thipse, S.S., and Dreizin, E.L., “Metal partitioning in products of incineration of municipal solid waste” Chemosphere 46:837 - 849 (2002)
  • Thipse, S.S., Schoenitz, M., and Dreizin, E.L., "Morphology and composition of the fly ash particles produced in incineration of municipal solid waste" Fuel Processing Technology 75:173-184 (2002)
  • X. Wang, C. Zhu and R. Ahluwalia, “Numerical Simulation of Evaporating Spray Jet in a Concurrent Gas-Solids Pipe Flow”, Powder Technology, 2002, submitted.
  • C. Zhu, X. Wang, G. L. Liu, and L.-S. Fan, “A Similarity Model of Evaporating Liquid Spray Jets in Concurrent Gas-Solid Flows”, Powder Technology, 119, 292-297, 2001
  • L.-S. Fan, R. Lau, C. Zhu, K. Vuong, W. Warsito, X. Wang, G. Liu, “Evaporative Liquid Jets In Gas-Liquid-Solid Flow System”, Chemical Engineering Science, 56, 5871-5891, 2001
  • P. Singh, T.K.S. Solanky, R. Mudryy, R. Pfeffer and R. N. Dave, “Estimation of Coating Time in the Magnetically Assisted Impaction Coating Process,” Powder Technology, Vol. 121, No. 2-3, pp. 159-167, November 2001.
  • Qian, G. H., I. Bagyi, I. W. Burdick, R. Pfeffer, H. Shaw and J. Stevens, “Gas-Solid Fluidization in a Centrifugal Field”, AIChE Journal, 47(5), 1022-1034, 2001.
  • R. Pfeffer, R. N. Dave, D. Wei and M. Ramlakhan, “Synthesis of Engineered Particulates with Tailored Properties Using Dry Particle Coating”, Powder Technology, Vol. 117, pp. 40-67, 2001.
  • Rossi, S., Dreizin, E.L., and Law, C.K., “Combustion of Aluminum Particles in Carbon Dioxide” Combustion Science and Technology, Vol. 164:209 - 237 (2001)
  • Thipse, S. S., Sheng, C., Booty, M.R., Magee, R.S., and Dreizin, E.L., “Synthetic fuel for imitation of municipal solid waste in experimental studies of waste incineration” Chemosphere 44(5):1071 - 1077 (2001)
  • Xiao, S., K. Ma, X. Tang, H. Shaw, R. Pfeffer and J. Stevens, “The Lean Catalytic Reduction of Nitric Oxide by Solid Carbonaceous Materials”, Applied Catalysis B: Environmental, Vol. 32, 107-122, 2001.
  • C. Zhu, C.-H. Lin and C.-S. Cheung, “Inertial Impaction Dominated Fibrous Filtration with Rectangular or Cylindrical Fibers”, Powder Technology, 112, 149-162, 2000.
  • Dreizin, E.L., “Phase Changes in Metal Combustion” Progress in Energy and Combustion Science, 26 (1): 57-78 (2000)
  • Dreizin, E.L., and Hoffmann, V.K., “Experiments on magnesium aerosol combustion in microgravity” Combustion and Flame 122:20-29 (2000)
  • Dreizin, E.L., Berman, C.H., and Vicenzi, E.P., “Condensed-phase modifications in magnesium particle combustion in air” Combustion and Flame 122:30-42 (2000)
  • Dreizin, E.L., "Phase Changes in Metal Combustion", Progress in Energy and Combustion Science, 26 (1): 57-78 (2000)
  • Dussaud, A. D., Khusid, B., Acrivos, A., Particle segregation in suspensions subject to high-gradient ac electric fields. Journal of Applied Physics, 88(9), 5463-5473, 2000.
  • M. Ramlakhan, C-Y. Wu, S. Watano, R. N. Dave and R. Pfeffer "Dry Particle Coating Using Magnetically Assisted Impaction Coating (MAIC): Modification of Surface Properties and Optimization of System and Operating Parameters", Powder Technology, Vol. 112, No. 1-2, pp. 137-148, 2000.
  • R. N. Dave, C-Y. Wu, B. Chaudhuri and S. Watano "Magnetically Mediated Flow Enhancement for Controlled Powder Discharge of Cohesive Powders", Powder Technology, Vol. 112, No. 1-2, pp. 111-125, 2000.
  • S. Watano, Y. Imada, K. Miyanami, C.-Y. Wu, R. N. Dave, R. Pfeffer and T. Yoshida, "Surface Modification of Food Fiber by Dry Particle Coating", Journal of Chemical Engineering Japan, Vol.33, No.6, pp. 848-854, 2000.
  • R. N. Dave, A. Rosato, and I. S. Fischer, "Non-Intrusive Particle Tracking System for Particulate Flows and Vibrated Granular Beds", Particulate Science and Technology: An International Journal, pp. 125-139, Vol. 17, Number 1-2, January-June 1999.
  • S. Watano, R. Pfeffer, R. N. Dave and W. Dunphy, "Dry Particle Coating by a Newly Developed Rotating Fluidized Bed Coater," AIChE Symposium, Advanced Technology for Fluid-Particle System, vol. 321, No. 95, pp.112-116, 1999.
  • C-Y. Wu, S. Watano and R. N. Dave, "Magnetically Enhanced Powder Discharge from Storage under High Consolidation," Powder Handling and Processing, Vol. 10(4), pp. 357-361, October/December 1998.